Optical transmitter GPON

Availability: Out of stock


Prices without taxes

Optical transmitter GPON of 10 dBm of power

Optical transmitter with direct modulation, has an output port with 10 dBm of power. Microprocessor-controlled RF pre-distortion technology and optimization technology control allow the transmitter to achieve of the maximum of objective CTB, CSO and SBS and excellent CNR performance. Transforms the RF signal input into optical output signal. Ideal for transmitting CATV signal in RF Overlay, λ 1550 nm, in GPON networks over long distances. Double power supply and ACG.

  • SKU: Transmisor óptico GPON

Optical transmitter GPON with 1 output port, high linearity and optical isolation. Provides high quality images, long-distance signal transmission on television. Stability of the laser output power, through achieving temperature stability per temperature control circuit. Input with connector F. Output SC / APC.

The transmitter has a high linearity, optical isolation, DFB, thermoelectric cooling laser DFB. The machine is equipped with a stable light energy export circuit as well as a temperature stability control circuit and laser thermoelectric cooling device to ensure optimal laser performance and long-term stability. The microprocessor software monitors the status of the lasers, the operating parameters are displayed on the digital panel (VFD). The red light goes on to warn on the digital panel.




Laser type



1550 nm +- 10 nm

Optical modulation

Intensity Modulated

Optical output power

2 to 10 mW

Type Frequency range

47 to 862 MHz


>= 52 dB


<= - 65 dB


<= - 65 dB

IRF input impedance

75 Ω

RF input reurn loss

>16(47~550)MHz   >14(550~862)MHz

Input connector

F connector

Input signal level 

RF78 to 88 dBµV

Power supply

90-265 vAC (220 VAC  )- (-48vDC)

Optical output connector


Power consumption

50 to 150 W

Enviroment temperature

0 to 50 ºC


20 to 85 %



Main Features

High quality: The optimization system control technology allows the team to acquire the maximum objectives of CTB, CTO, SBS and excellent performance of CNR.

Remote SNMP: It has an SNMP RJ45 socket for remote management at any time.

High performance laser: The state of the laser is controlled by a microprocessor. If the parameters deviate from the permissible range established by the software, the laser will turn off automatically.

LCD display: shows the operating parameters. Alarms and warnings.

Power supply: Double power supply in AC or DC. Working range 85V ~ 265V AC or 48V DC. Chassis with automatic control of cooling temperature.


To see transmitter manual click on the link

To see CATV catalog click on the link


Write Your Own Review

You're reviewing: Optical transmitter GPON